Manual Call Point
Bristol Manual Call Points are fully compatible with most of the existing conventional systems. Red, yellow, blue, and green finishing are available.
Features:
- Available in flush or surface mounted models
- Plastic film on glass
- Test key inserted from bottom
- Clear protection cover is also available (Optional)
- Diodes for fault monitoring
Fire Alarm Bell
Bristol Fire Alarm Bells have low power consumption and long operating life.
Features:
- Electricity insulating base
- Can accept 2.5mm terminal cables
- Fitted with 2 series diodes for fault monitoring
- EN-54-3
Conventional Sounder Strobe
Electronic Sounder and Beacons are audio- visual devices suitable for places where high sound output and visual indication is required.
Features:
- Alert Sound and flash combined in one unit
- A select of 16 different tones
- Using ultra bright LEDs as source for light indication
- Fully synchronized operating frequencies and LED beacon
- Low power consumption
- Plug-in structure design for easy installation
- Compatible with a wide range of conventional panel or interface
Conventional Smoke Detectors
Optical Smoke Detector are activated when smoke particles enter the light path, and some of the light is scattered by reflec- tion and refraction onto the sensor. The light signal is processed and used to convey an alarm condition when it meets the preset criteria
Features:
- Intelligent drift compensation to the variation of external environment (temperature, humidity, dust, static) Can accurately detect the chronic fire happened in 24 hours
- Intelligent algorithm and judgment, warning reminder for dirty and cleaning
- Filter designed in both software and hardware, enhance the ability of anti-interference
- PCB board inside is sealed with full protection
- Low power consumption
- Unique chamber design for protection against dust, insects and other external interferences
- Talented design of structure without a single screw
- Compatible with a wide range of conventional panel or interface
Conventional Heat Detectors
Conventional Dual Heat Detectors respond either when the detecting element reaches a predetermined fixed temperature or to a specified rate of temperature change.
Multi Sensors
Optical Smoke Detector are activated when smoke particles enter the light path, and some of the light is scattered by reflec- tion and refraction onto the sensor. The light signal is processed and used to convey an alarm condition when it meets the preset criteria
Features:
- Improved dust protection and detection accuracy
- Dual LEDs for 360-degree visibility
- Low current consumption and wide voltage range
- Bases fitted with shorting spring to permit easy maintenance
